Directions for Use:
General Surface Cleaning - 250ml BIO-KLEEN in 750ml bottle, fill with potable water. Using diluted solution, spray and wipe surfaces. Where necessary rinse with clean potable water and dry.

Heavy Soil & Drain Cleaning - Use Neat (as supplied). Pour BIO-KLEEN directly into drain, DO NOT RINSE. For effective cleaning results and drain odour maintenance; cleaning application must be completed regularly.

Floor Cleaning - Dilute BIO-KLEEN at a rate of 1L per 10L cold water.
1. Sweep floors thoroughly,
2. Apply BIO-KLEEN solution at the correct dilution rate,
3. Scrub floor with stiff bristle brush,
4. Squeegee excess solution from floor.
DO NOT RINSE. Allow solution to remain on the surface overnight or during shutdown period. BIO-KLEEN will remain active and continue to attack the grease and fats on the floor until all soils have been consumed. As the soils are being removed, the surface will become less slippery; reducing the risk of potential accidents.
BIO-KLEEN should NOT be used in conjunction with any other chemical compound (no acids, no alkalines, and no sanitisers).
Where necessary rinse floors with clean potable water after use and allow to dry.

Odour Control Fogging - Dilute BIO-KLEEN at a rate of 30ml per litre cold water.
Inline Waste Microbial Stimulant - use Neat (as supplied).