• Achieve a beautiful, glossy shine!
• Non-Slip finish
• Capable of producing a 'wet look' non-slip finish
• Formulated for use on all floors where a daily ultra-high speed maintenance program is utilised (1,000 rpm+)
• Self polishing
• Milestone Chemicals Specialty Floor Cleaner
• Australian Made & Owned
An acrylic co-polymer sealer-finish formulated for all floors where a daily ultra-high speed maintenance program is utilised.
Burnishing achieves a brilliant “wet look shine” non-slip finish.
To produce a hard, dry, non-slip film giving lasting protection and a beautiful gloss; follow these steps.
PREPARATION
Prepare floors by removing all old polish and build up using UNISTRIP. See UNISTRIP label for dilution and directions for use.
RESEALING
When floor has dried after stripping, apply one thin coat of UNIPOL and allow to dry. DO NOT Buff the floor. Allow 1 hour, and repeat; applying a second thin coat. Inspect the floor for finish, and if necessary apply a third thin coat of UNIPOL and allow to dry. The floor is now completely resealed and ready for use.
UNIPOL may be buffed using a High Speed and/or an Ultra-High Speed polishing machine after second coat and final coats.
DAILY MAINTENANCE
Mop floors daily with a solution from our PROOF RANGE, in accordance with recommended instructions. Allow drying and buff lightly, where necessary. Bad scuff marks should be removed by rubbing with fine ‘grade-0’ steel wool pads, dipped in UNIPOL. Buff floor after UNIPOL has dried.
Product Name: UNIPOL
Colour: White opaque
Form: Liquid
Scent: Mild acrylic
pH Level: 8.0 - 9.0
Environmental Impact: Inherently Biodegradable.
Certifications: Australian Made & Owned
Septic Safe (Y/N): N
Important Safety Information
DG Rated (Y/N): N
Read Label before use.
Please be advised not all items are available for shipping.
Please refer to our full Shipping & Returns Policy
